Specification:
Model |
JCEA-PP45 |
JCEA-PP55 |
JCEA-PP65 |
JCEA-PP75 |
| A) Recommend Layflat Width Be Produced |
150 - 350 mm |
200 - 550 mm |
300 - 700 mm |
400 - 900 mm |
| B) Extruder |
|
|
|
|
| ¡@1. Screw Dia. & L/D |
45mm; L/D=28:1 |
55mm; L/D=28:1 |
65mm; L/D=28:1 |
75mm; L/D=28:1 |
| ¡@2. Cylinder Blower |
2 Sets |
2 Sets |
2 Sets |
3 Sets |
| ¡@3. Driving Motor |
15 HP V.S Motor |
25 HP V.S Motor |
30 HP V.S Motor |
40 HP V.S Motor |
| ¡@4. P.P Dies & Airing |
200mm |
300mm |
350mm |
450mm |
| ¡@5. Control Panel |
Independent Type With 4-Point |
Independent Type With 5-Point |
Independent Type With 5-Point |
Independent Type With 6-Point |
| |
Temperature Controller |
Temperature Controller |
Temperature Controller |
Temperature Controller |
| C) Cooling Equipment: |
|
|
|
|
| ¡@1. Cooling Blower |
1/4 HP |
1/4 HP |
1/2 HP |
1/2 HP |
| ¡@2. Water Cooling System |
1 Set |
1 Set |
1 Set |
1 Set |
| ¡@3. Product Sizing Ring |
10PCES (Size Specified By Buyer) |
10PCES (Size Specified By Buyer) |
10PCES (Size Specified By Buyer) |
10PCES (Size Specified By Buyer) |
| D) Take-Up Tower: |
|
|
|
|
| ¡@1. Take-Up Roller |
500mm |
700mm |
900mm |
1100mm |
| ¡@2. Take-Up Motor |
1/2 HP D.C Motor |
1/2 HP D.C Motor |
1 HP D.C Motor |
2 HP D.C Motor |
| ¡@3. Film Drying System |
1 Set With Hot Air Blower |
1 Set With Hot Air Blower |
1 Set With Hot Air Blower |
1 Set With Hot Air Blower |
| E) WIDING UNIT: |
|
|
|
|
| ¡@1. Type Of Winder |
Two Spindle Bobbin Winder |
Two Spindle Bobbin Winder |
Two Spindle Bobbin Winder |
Two Spindle Bobbin Winder |
| ¡@2. Effective Width |
420mm |
550mm |
800mm |
1000mm |
| ¡@3. Winding Motor |
15 KG/CM Torque Motor |
20 KG/CM Torque Motor |
30 KG/CM Torque Motor |
30 KG/CM Torque Motor |
Optional Device:
Auto. Hopper Loader, Surface Treater, Pressure Gauge, Embossing Unit, Two-Station Surface Winder, Air Chiller, D.C. Motor, Inverter Control, Rotary Die, LD/LLDPE Die & Airring, Oscillating Take-Up Unit, Air Shaft, Flexo. Printing Press, E P C, Tension Control |
