Item |
Specification / Model |
JCEA-45 |
| Product |
Resin To Be Used |
HD/LD/LLDPE |
Main Product |
HDPE/LDPE/LLDPE Tubular Film |
Width Of Film (mm) |
600 |
Thickness OD Film |
HDPE: 0.008 ~ 0.12mm
HDPE/LLDPE: 0.01 ~ 0.20mm |
Max Extrusion Output |
48 |
| Extruder |
Type Of Extruder |
Low Base Type |
Main Drive Motor |
AC20HP Inverter |
| Gear Box |
Type |
One Stage Speed Variable |
Gear Material |
SCM-21 Carbonized Treat & Gear Face Ground |
| Screw |
Screw Diameter |
φ 45mm |
L/D Ration |
30:1 |
Material Of Screw |
SACM-4 Nitrided Honed And Hard Chrome Plated |
| Barrel |
Material Used |
SACM-645 Nitrided & Polished |
Auto Thermal Controller |
2 |
Heating Capacity (kw) |
6 KW |
Barrel Cooling |
With Blower Air Cooled |
| Adapter |
Screen Filter |
φ 45 x 1 |
Auto Thermal Controller |
1 |
| Die Head |
Die Type |
Inflation Spiral Type |
Die Head |
1 Set |
Auto Thermal Controller |
2 |
Heating Capacity (Kw) |
3.8 (kw) |
Air Ring |
1 Set |
Bubble Cooling Blower |
3 HP |
| Take Up Unit |
Drive Motor |
1 HP x 1/10 |
Pinch Roller Width |
650 |
Line Speed |
8-80M/Min |
| Winder |
Type Of Winder |
Surface Contaot Type |
Winding Speed |
0~100M/Min |
Winding Motor |
30kg/cm |
Winding Roller |
φ 250 x 750 |
| Electrical Control Panel |
1 Set |
| Dimension Of Machine (L x W x H) |
4000 x 2200 x 4500 |
| Power Consumption (kw) |
35kw |
| Optional Equipment |
1. Auto Loader
2. Embossing Roll
3. Film Surface Treater
4. Die Rotary Device
5. Back To Back Winder
6. Auto Film Width Controller
7. Auto Voltage Regulator For Control Panel
8. Auto Screen Changer
9. Main Motor By Invertor Control
10. Air Blower By Invertor
11. Air Compressor |
* Design & specification subject to change without notice.
* Specification here is for reference only. The actual specification will be subject to final quotation.
